An ATP Bio-Clean Monitoring system is a device that is used to check the cleanliness of an environment. The system provides a numerical value reading that is used to spot check the cleaning standards deployed by a site’s cleaning or infection control team.
The ATP system uses a hand-held device (the luminometer) combined with a sampling swab to identify the cleanliness of any given surface or water sample, by identifying the level of ATP that is present.
| Parent Category | ATP ANALYSER (Bio-Clean Monitoring Systems), |
|---|---|
| Subcategory | LABORATORY INSTRUMENTS AND EQUIPMENTS, |
Description
An ATP Bio-Clean Monitoring system is a device that is used to check the cleanliness of an environment. The system provides a numerical value reading that is used to spot check the cleaning standards deployed by a site’s cleaning or infection control team.
The ATP system uses a hand-held device (the luminometer) combined with a sampling swab to identify the cleanliness of any given surface or water sample, by identifying the level of ATP that is present.
It is widely known that there is a higher chance of the presence of microorganisms where there is ATP. Thus, the higher the ATP level, the higher the probability that bacteria and germs are present. The cleaning and Infection control team will incorporate the use of an ATP system into standard cleaning procedures, to allow the fast and effective inspection of areas within a mere 15 seconds of the swab being placed in the handset.
Technical Specification:
qLarge screen clear LCD display
qDetection accuracy: 5 × 10-18mol / ATP?
qDetection range: 0 to 9999 RLUs
qDetection time: 15 seconds
qDetection error: ± 5 RLUs
qOperating temperature range: 5 ºC to 40 ºC
qOperating humidity range: 20-85%
qATP recovery: 90-110%
qDetection mode: RLU, coliform screening
q50 user ID settings
qCan set the number of results limit: 250
q2000 memory storage
qAutomatically determine the qualified
qAutomatic statistical pass rate
qBuilt-in self-calibration light source
qBoot 30 seconds self test
qWith RS232 interface (with USB interface), the results can be uploaded to the PC
qInstrument size (W × H × D): 192mm × 87mm × 34mm
qThe use of two standard 5 batteries or rechargeable lithium battery
qStandby state (20 ºC): 6 months
qChinese operation manual
qStable liquid luciferase
qWetting the integrated collection of swabs
